Analysis Of Change In Intake Manifold Length And Development Of Variable Intake System

Shrinath Potul, Rohan Nachnolkar

2014 · 19 citations · 3 references

Concepts

Abstract

Abstract: Gas dynamics of intake system plays a key role in deciding the performance of an engine. This dynamics are different for fuel injected and carbureted engine and vary according to type of engine, number of cylinders, temperature at inlet, valve timing, valve angle and other factors. Careful design of the manifolds enables the engineer (designer) to manipulate the characteristics to the desired level. This paper investigates the effects of intake runner length on the performance characteristics of a four-stroke, single-cylinder spark-ignited engine with electronically controlled fuel injector. In this paper basic intake tuning mechanisms were described. Engine performance characteristics such as brake torque, brake power, brake mean effective pressure and specific fuel consumption were taken into consideration and virtual simulation software LOTUS ENGINE SIMULATION was used to evaluate the effects of the variation in the length of intake plenum on these parameters. It was found that change in runner length had a considerable effect on the rpm atwhich peak value of torque was obtained (occurred). Accordingly a system to adjust the manifold length (tuned adjustable intake pipe) was designed and developed. According to the simulation graphs, in order to increase the torque performance, plenum length must be extended for low engine speeds and shortened as the engine speed increases.

References

3