Adsorption of nickel (II) ions onto activated carbon from tamarind seeds for synthetic wastewater treatment: Isotherm, kinetic, and thermodynamic studies

Plaisuda Janthabut, Pakpoom Athikaphan, Phattharapon Jekruk, Pattarasak Kanchunsi, Pongpanit Kongkoed, Supinya Nijpanich, Somnuk Theerakulpisut, Arthit Neramittagapong, Sutasinee Neramittagapong

Environmental Challenges · 2025 · 11 citations · 29 references

DOIFull text

Open access

Concepts

Abstract

The removal of nickel from synthetic wastewater through adsorption using activated carbon derived from tamarind seeds was investigated. The study also compared two carbonization methods: traditional and hydrothermal. The results indicated that activated carbon synthesized via the hydrothermal method produced a higher surface area than that obtained through traditional carbonization. The synthesized activated carbon exhibited mesoporous and microporous structures with impressive specific surface areas of 1172 m²/g and micropore areas of 837 m²/g, at an 8.11 % yield. Structural analysis revealed a highly porous material retaining only C = C, C = O , C-O, and -OH groups. The activated carbon demonstrated high efficiency in Ni 2+ ion adsorption, achieving approximately 100 % removal from a 20 mg/L solution using 50 mg of adsorbent at 30 °C for 120 min. The results were fitted to the Langmuir isotherm with an R 2 of 0.994, yielding a maximum Ni 2+ adsorption capacity (q max ) of 39.25 mg/g. The kinetics model was fitted to a pseudo-second-order (PSO) kinetics model with a rate constant of 0.0807 g/mg∙min. A thermodynamic analysis suggested that the adsorption of Ni 2+ ions on activated carbon derived from tamarind seeds is spontaneous and endothermic. This synthesis method provides a sustainable approach to enhancing the value of tamarind seeds by converting them into high-performance activated carbon. This process produces a bio-based adsorbent with significant potential for removing nickel from wastewater.

References

29