APL Photonics · 2024 · 18 citations · 22 references
Natural SciencesBiomedical EngineeringBiomedical OpticsBiophotonicsDiagnostic ImagingInfrared SpectroscopyNear-infrared SpectroscopyOptical Coherence TomographyOptical SpectroscopyOptical TomographyTerahertz SpectroscopyAxial ResolutionHigh-speed ImagingNear-infrared TomographyOptical Coherence Tomography ScatteringPenetration DepthScan SpeedScatteringSpectrum Detection
Non-destructive testing (NDT) is crucial for ensuring product quality and safety across various industries. Conventional methods, such as ultrasonic, terahertz, and x-ray imaging, have limitations in terms of probe-contact requirement, depth resolution, or radiation risks. Optical coherence tomography (OCT) is a promising alternative to solve these limitations, but it suffers from strong scattering, limiting its penetration depth. Recently, OCT in the mid-infrared (MIR) spectral region has attracted attention with a significantly lower scattering rate than in the near-infrared region. However, the highest reported A-scan rate of MIR-OCT has been 3 kHz, which requires long data acquisition time to take an image, unsatisfying industrial demands for real-time diagnosis. Here, we present a high-speed MIR-OCT system operating in the 3–4 µm region that employs the frequency-swept spectrum detection in OCT technique based on time-stretch infrared spectroscopy. By integrating a broadband femtosecond MIR pulsed laser operating at a repetition rate of 50 MHz, we achieved an A-scan rate of 1 MHz with an axial resolution of 11.6 µm, a 10 dB roll-off depth of about 700 µm, and a sensitivity of 55 dB. As a proof-of-concept demonstration, we imaged the surface of substrates covered by highly scattering paint coatings. The demonstrated A-scan rate surpasses previous state of the art by more than two orders of magnitude, paving the way for real-time NDT of industrial products, cultural assets, and structures.
22
Supercontinuum generation in photonic crystal fiber
John M. Dudley, Goëry Genty, Stéphane Coen · Reviews of Modern Physics · 2006 · 4.3K citations
X-ray based methods for non-destructive testing and material characterization
Randolf Hanke, Theobald Fuchs, Norman Uhlmann · Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment · 2008 · 249 citations
Natural Sciences, Materials Engineering, Materials Science +14
Widely-tunable mid-infrared frequency comb source based on difference frequency generation
Axel Ruehl, Alessio Gambetta, Ingmar Hartl et al. · Optics Letters · 2012 · 110 citations · Full text
Natural Sciences, Physics, Optics +16