Chemistry of Materials · 2024 · 10 citations · 62 references
EngineeringChemical EngineeringMaterials ScienceMembrane SciencePolymer ChemistryPolymer EngineeringMembrane EngineeringMembrane FabricationMembrane FiltrationMembrane MaterialsPolymeric MembranesWater Desalination MembranesCondensation PolymerizationDesalination MembranesInterfacial PolymerizationNanofiltrationNanofiltration MembranesPolyamideReverse Osmosis MembranesSelective Layer Formation
Molecular layer deposition (MLD) provides the opportunity to perform condensation polymerization one vaporized monomer at a time for the creation of precise, selective nanofilms for desalination membranes. Here, we compare the structure, chemistry, and morphology of two types of commercial interfacial polymerzation (IP) membranes with lab-made MLD films. M-phenylenediamine (MPD) and trimesoyl chloride (TMC) produced a cross-linked, aromatic polyamide often used in reverse osmosis membranes at MLD growth rates of 2.9 Å/cycle at 115 °C. Likewise, piperazine (PIP) and TMC formed polypiperazine amide, a common selective layer in nanofiltration membranes, with MLD growth rates of 1.5 Å/cycle at 115 °C. Ellipsometry and X-ray reflectivity results suggest that the surface of the MLD films is comprised of polymer segments roughly two monomers in length, which are connected at one end to the cross-linked bulk layer. As a result of this structure as well as the triple-functionality of TMC, MPD-TMC had a temperature window of stable growth rate from 115 to 150 °C, which is unlike any non-cross-linked MLD chemistries reported in the literature. Compared to IP films, corresponding MLD films were denser and morphologically conformal, which suggests a reduction in void volumes; this explains the high degree of salt rejection and reduced flux previously observed for exceptionally thin MPD-TMC MLD membranes. Using X-ray photoelectron spectroscopy and infrared spectroscopy, MLD PIP-TMC films evidenced a completely cross-linked internal structure, which lacked amine and carboxyl groups, pointing to a hydrophobic bulk structure, ideal for optimized water flux. Grazing-incidence wide-angle X-ray scattering showed broad features in each polyamide with d -spacings of 5.0 Å in PIP-TMC compared to that of 3.8 Å in MPD-TMC. While MLD and IP films were structurally identical to PIP-TMC, MPD-TMC IP films had a structure that may have been altered by post-treatment compared to MLD films. These results provide foundational insights into the MLD process, structure–performance relationships, and membrane fabrication.
62
Rethinking the term “pi-stacking”
Chelsea R. Martinez, Brent L. Iverson · Chemical Science · 2012 · 1.6K citations · Full text
Eric M. Vrijenhoek, Seungkwan Hong, Menachem Elimelech · Journal of Membrane Science · 2001 · 1.2K citations · Full text
Engineering, Chemical Engineering, Environmental Engineering +17