Journal of Materials Research and Technology · 2023 · 18 citations · 40 references
Natural SciencesMaterials EngineeringMaterials ScienceAdditive ManufacturingMechanical Behavior Of MaterialsMetallurgyAlloysEutectic TransformationsHigh-temperature MaterialsMetal Additive ManufacturingMetalsAdditive Manufacturing AlloysAdditive Manufacturing MicrostructureHigh-entropy AlloysLarge-scale ProductionSelective Laser MeltingTensile StrengthUltimate Tensile StrengthYield Strength
Additive manufacturing of high entropy alloys (HEAs) has attracted increasing interest. A high-strength Co-free HEA with eutectic structure was developed using selective laser melting (SLM) technology in this work. This material shows excellent mechanical properties over a wide temperature range, from 25 °C to 500 °C, owing to its ultra-fine eutectic cellular structure with BCC phase wrapped by FCC phase. Specifically, the Co-free HEA exhibits a room temperature tensile strength exceeding 1200 MPa, and a yield strength of more than 880 MPa. The strength results of this Co-free HEA represent a significant improvement compared to other Co-free HEAs or middle entropy alloys (MEAs) manufactured using SLM. Given their low cost, Co-free HEAs are highly promising for commercial large-scale applications, and this research suggests that this high-strength Co-free HEA with eutectic structure may have particular value in SLM manufacturing mold applications.
40
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Zhiming Li, K.G. Pradeep, Yun Deng et al. · Nature · 2016 · 4K citations
Natural Sciences, Materials Engineering, Materials Science +14
Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys
X.F. Wang, Yong Zhang, Yu Qiao et al. · Intermetallics · 2006 · 718 citations
Natural Sciences, Materials Engineering, Materials Science +13
Critical instability at moving keyhole tip generates porosity in laser melting
Cang Zhao, Niranjan D. Parab, Xuxiao Li et al. · Science · 2020 · 652 citations · Full text