Microsystems & Nanoengineering · 2023 · 40 citations · 49 references
EngineeringMaterials EngineeringMaterials ScienceNanomaterialsNanotechnologySensorsIon-conducting MaterialsMechanical SensorsMems SensorsPressure SensorsSensor MaterialsSoft SensorsCapacitive SensorsFlexible Pressure SensorsFlexible SensorsHexagonal Boron NitrideMass Production Of NanostructuresPrinted SensorsSensingSensor Arrays
Abstract Recently, flexible iontronic pressure sensors (FIPSs) with higher sensitivities and wider sensing ranges than conventional capacitive sensors have been widely investigated. Due to the difficulty of fabricating the nanostructures that are commonly used on electrodes and ionic layers by screen printing techniques, strategies for fabricating such devices using these techniques to drive their mass production have rarely been reported. Herein, for the first time, we employed a 2-dimensional (2D) hexagonal boron nitride ( h -BN) as both an additive and an ionic liquid reservoir in an ionic film, making the sensor printable and significantly improving its sensitivity and sensing range through screen printing. The engineered sensor exhibited high sensitivity (S min > 261.4 kPa −1 ) and a broad sensing range (0.05–450 kPa), and it was capable of stable operation at a high pressure (400 kPa) for more than 5000 cycles. In addition, the integrated sensor array system allowed accurate monitoring of wrist pressure and showed great potential for health care systems. We believe that using h -BN as an additive in an ionic material for screen-printed FIPS could greatly inspire research on 2D materials for similar systems and other types of sensors.
49
Skin-integrated wireless haptic interfaces for virtual and augmented reality
Xinge Yu, Zhaoqian Xie, Yang Yu et al. · Nature · 2019 · 1K citations
Engineering, Mechatronics Engineering, Assistive Technology +13
Flexible Capacitive Tactile Sensor Based on Micropatterned Dielectric Layer
Tie Li, Hui Luo, Xuewen Wang et al. · Small · 2016 · 502 citations