Sensors · 2023 · 14 citations · 23 references
EngineeringMaterials ScienceMechanical EngineeringPhotonicsSensorsVibrationFiber OpticsOptical FibersOptical SensingOptical SensorsTemperature SensorsVibration MeasurementFabry-perot ResonatorsFiber-optic SensingFiber-optic SensorsInertial MassLaser AblationOptical Fiber SensorsResonant FrequencyVibration Sensors
In this paper, a fiber-optic Fabry–Perot (F–P) vibration sensor that can work at 800 °C is proposed. The F–P interferometer is composed of an upper surface of inertial mass placed parallel to the end face of the optical fiber. The sensor was prepared by ultraviolet-laser ablation and three-layer direct-bonding technology. Theoretically, the sensor has a sensitivity of 0.883 nm/g and a resonant frequency of 20.911 kHz. The experimental results show that the sensitivity of the sensor is 0.876 nm/g in the range of 2 g to 20 g at an operating frequency of 200 Hz at 20 °C. The nonlinearity was evaluated from 20 °C to 800 °C with a nonlinear error of 0.87%. In addition, the z-axis sensitivity of the sensor was 25 times higher than that of the x-axis and y-axis. The vibration sensor will have wide high-temperature engineering-application prospects.
23
Femtosecond pulse laser ablation of sapphire in ambient air
X.C. Wang, G.C. Lim, Hong Zheng et al. · Applied Surface Science · 2004 · 117 citations
Natural Sciences, Physics, Optics +12
A Fiber-Optic Bragg Grating Seismic Sensor
A. Laudati, F. Mennella, M. Giordano et al. · IEEE Photonics Technology Letters · 2007 · 53 citations