Coatings · 2022 · 13 citations · 16 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsSurface ScienceThin FilmsChemical Vapor DepositionCoatingsEngine MaterialsThin Film Mechanical PropertiesThin Film Surface MorphologyThin-film MaterialsAerospace ApplicationsChemical Vapor Deposition CoatingsTemperature Effects On DepositionThin Film Surface CharacterizationThin Oxide FilmsThin Oxide LayersThin-film CoatingsX-ray Diffraction Analysis
A high-temperature-resistant and high-performance hafnium oxide (HfO2) coating for aerospace engines was developed. HfO2 thin film coatings were prepared by chemical vapor deposition (CVD) at 1200, 1250, 1300, and 1350 °C, respectively. The crystal structure and surface morphology of the HfO2 thin films at different deposition temperatures were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The effect of deposition temperature on the mechanical properties of the HfO2 thin films was studied by means of the drainage method and nanoindentation. The results showed that the HfO2 coatings deposited at different deposition temperatures are monoclinic crystal structures, and the surface morphology changes from cellular particles to columnar particles, and finally, to a loose and porous layered structure. When the deposition temperature is 1300 °C, the density of the HfO2 film is the highest, 9.62 ± 0.03 g/cm3, and the hardness is the highest, 7.33 ± 0.04 GPa. A HfO2 coating with the best comprehensive mechanical properties was prepared by changing the deposition temperature, which provided an experimental basis for the application of a HfO2 coating in the aerospace field.
16
Hafnia and hafnia-toughened ceramics
J. Wang, H. P. Li, R. Stevens · Journal of Materials Science · 1992 · 584 citations
Natural Sciences, Materials Engineering, Materials Science +12
Rajesh Kumar, Vishnu Chauhan, Nikhil Koratkar et al. · Journal of Alloys and Compounds · 2020 · 44 citations
Natural Sciences, Materials Engineering, Materials Science +17