ACS Applied Materials & Interfaces · 2022 · 73 citations · 38 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsEnergy MaterialsSemiconductor MaterialsCarrier TransportDopingPhotovoltaic DevicesPhotovoltaic MaterialsSemiconductor InterfacesSolar CellsCarrier Transport MechanismsCharge ExtractionDeep-level DefectsElectron Transport LayersHumidity StabilityOpen-circuit VoltagePerovskite Solar CellsThermal Stability
SnO2 is widely used as the electron transport layer (ETL) in n–i–p perovskite solar cells. However, the deep-level defects at the interface between SnO2 and the perovskite film will lead to energy loss, reducing the open-circuit voltage. Therefore, the interface optimization is essential to raise the efficiency and enhance the stability of perovskite solar cells. In this work, we introduce NH4F into the SnO2 electron transport layers, and the optimized SnO2 films reduce the interface defect density, improve the charge extraction, and reveal a better energy-level arrangement. Compared to the conventional SnO2 perovskite solar cell, the average Voc is improved by 70 mV with the champion efficiency up to 22.12%. Moreover, the unencapsulated F-doped SnO2 perovskite solar cells show better thermal stability (maintained 86.2%) and humidity stability (maintained 80.8%) after 35 days.
38
Surface passivation of perovskite film for efficient solar cells
Qi Jiang, Yang Zhao, Xingwang Zhang et al. · Nature Photonics · 2019 · 4.7K citations
Natural Sciences, Materials Engineering, Materials Science +16
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
Hanul Min, Do Yoon Lee, Junu Kim et al. · Nature · 2021 · 3.1K citations
Natural Sciences, Materials Engineering, Materials Science +16