Forces in Mechanics · 2022 · 20 citations · 19 references
EngineeringMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallurgyStructural MaterialsFatigueLaser Beam WeldingLaser Material ProcessingResidual StressResidual Stress In JointsWelding RoboticsFatigue In Welded JointsFatigue StrengthHigh-cycle FatigueLaser Weld Residual StressLaser WeldingNd:yag Laser TreatmentResidual Stress In Welded JointsX-ray Diffraction Detection
Laser peening (LP) is a well-established technique for introducing compressive residual stress (RS) near the surface of metal components, to improve their high-cycle fatigue properties. The authors have developed a compact LP device with a thumb-sized Nd:YAG microchip laser mounted on a collaborative robot arm. The device was applied to 9-mm-thick HT780 high-strength steel plate samples with irradiated pulse energies of 7.5−8.0 mJ, spot sizes of 0.42−0.58 mm and pulse densities of 100−1,600 pulses/mm2. X-ray diffraction showed that the maximum compressive RS was over 500 MPa near the surface, and the LP effect reached a depth of approximately 0.1 mm from the surface. Butt-welded HT780 samples were laser-peened with a pulse energy of 7.7 mJ, spot size of 0.49 mm and pulse density of 800 pulses/mm2. Then, the samples were subjected to a uniaxial fatigue test with a stress ratio of 0.1. The results showed that the fatigue strength at 107 cycles was improved by at least 50 MPa, comparable to the improvement attained by LP in a previous study with a pulse energy of 200 mJ from a conventional Nd:YAG laser.
19
Physical study of laser-produced plasma in confined geometry
R. Fabbro, Jean–Yves Fournier, Patrick Ballard et al. · Journal of Applied Physics · 1990 · 1.5K citations
Physics and applications of laser-shock processing
R. Fabbro, Patrice Peyre, Laurent Berthe et al. · Journal of Laser Applications · 1998 · 411 citations
Natural Sciences, Materials Engineering, Materials Science +16