Progress in Photovoltaics Research and Applications · 2021 · 30 citations · 35 references
EngineeringMaterials EngineeringMaterials ScienceSemiconductor DevicesSemiconductor MaterialsThin FilmsDevice CharacterizationPhotovoltaic MaterialsSemiconductor Device MaterialsSemiconductor InterfacesSemiconductor Thin FilmsSolar CellsAbsorber MaterialsCapacitanceCurrent-voltage CharacterizationJunction CapacitanceSemiconductor CharacterizationSolar Cell CharacterizationSolar Cell Device PhysicsThin-film Solar Cells
Abstract Admittance measurements of Cu (In, Ga)Se 2 (CIGSe) solar cells typically show at least one capacitance step, the so‐called N1 signal. Its origin is still under debate, even though the signal is present in almost all CIGSe solar cells. In this work, CIGSe solar cells with different absorber layer thicknesses have been prepared on Mo and on indium tin oxide (ITO)‐based back contacts. The samples were analyzed by temperature‐dependent current–voltage (JV) and admittance measurements. No N1 signal was found for ITO‐based samples. The N1 signal was also absent in Mo‐based solar cells with an ultrathin absorber layer, unless a forward bias voltage was applied. The observations can be consistently explained by a back contact barrier, which is only present in the Mo‐based solar cells. The explanation is further supported by measured JV curves and by theoretical simulations. The results give a strong indication that the N1‐signal is due to a back contact barrier. While a back contact barrier is not necessarily detrimental for regular CIGSe solar cells, it may be an issue for CIGSe solar cells with ultrathin absorbers, where a so‐called punch‐through effect can occur.
35
Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells
Takahiro Wada, Naoki Kohara, Shiro Nishiwaki et al. · Thin Solid Films · 2001 · 312 citations
Renaud Varache, Caspar Leendertz, Marie‐Estelle Gueunier‐Farret et al. · Solar Energy Materials and Solar Cells · 2015 · 277 citations