2021 IEEE International IOT, Electronics and Mechatronics Conference (IEMTRONICS) · 2021 · 14 citations · 10 references
EngineeringComputer EngineeringElectrical EngineeringLow-power DesignMicroelectronicsSemiconductor DevicesCmos Circuit DesignDevice ModelingDevice SimulationField-effect TransistorsLow-power Digital Circuit DesignMetal-oxide-semiconductor Field-effect TransistorsField-effect Transistor SimulationLow-power Cmos DesignLow-power Design VerificationMetal-oxide-semiconductor Field-effect Transistor ModelingMosfet ModelingTunneling Field-effect Transistors
This work presents the implementation of analytical transport model of MoS <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub> tunnel field effect transistor (TFET) using Verilog-A in Cadence/Spectre. The parameters of the model are extracted, and most notable is its high I <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">ON</sub> /I <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">OFF</sub> ratio, which makes it suitable for low power design, and IoT applications. Subsequently, we employ the TFET model in the design of ultralow power phase locked loop (PLL). Various components of PLL are examined in terms of their structures and functions. The results show that the voltage controlled oscillator (VCO) operates from 0.5 GHz to 2.9 GHz with a tuning range of 82.8%. It also consumes 1.91 μW power at 2 GHz carrier and has a phase noise of -117.3 dBc/Hz at 1 MHz offset frequency. The average power consumed by phase locked loop is 0.021 mW. In addition, the operation of the PLL is not sensitive to temperature variations.
10