Octave-Tuning Dual-Core Folded VCO Leveraging a Triple-Mode Switch-Less Tertiary Magnetic Loop

Abstract

To satisfy the requirements for multi-standard frequency generation, mode-switching oscillators are developed to increase the frequency tuning range without incurring considerable phase noise penalty. However, this improvement in the tuning range is often limited by the parasitics of the circuitry for mode selection and tuning. To address this challenge, this work presents a dual-core octave-tuning VCO using a switch-less tertiary magnetic coupling loop. The design employs the benefits of transformer-switching without incurring switch loss and quality factor degradation and also the benefits of mode switching without the parasitics from the mode selection and tuning network. The VCO employs a non-constant RC scaling for the capacitors' bank, across the tuning bits, and positive feedback dc-coupled inductive-degenerated output buffer to maximize the tuning range. Implemented in 22 nm fully depleted silicon-on-insulator (FDSOI), the dual-core VCO achieves a 72% tuning at 8-17 GHz and a figure-of-merit-tuning (FoM <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">T</sub> ) of 208.8 dBc/Hz at 11 GHz. The chip operates from a 0.45 V supply with a power consumption of 17-33 mW and a core area of 0.39 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . To the best of our knowledge, the VCO achieves the highest FoM <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">T</sub> and lowest supply for designs over 10 GHz.