Development of microfabricated planar slow-wave structures on dielectric substrates for miniaturized millimeter-band traveling-wave tubes

Abstract

We report the results of the design, simulation, fabrication, and cold-test measurements of millimeter-band 2D planar microstrip slow-wave structures (SWSs) on dielectric substrates. Such structures have a high slow-wave factor, which allows for low-voltage operation and reduction in the size and weight of the device. A low-cost and flexible fabrication technology based on magnetron sputtering and subsequent laser ablation has been developed and is reported in the paper. Microstrip meander-line SWS circuits at V-, W-, and D-bands have been fabricated and characterized. The fabrication of ring-bar planar SWSs by the photolithographic method is also discussed. Experimental measurement of S-parameters of the fabricated structures reveals good transmission properties. Return loss (S11) does not exceed −10 dB and attenuation is about 2 dB/cm in the V-band, 10 dB/cm in the W-band, and 8.5 dB/cm in the D-band.