Journal of Micromechanics and Microengineering · 2020 · 12 citations · 29 references
EngineeringMechanical EngineeringPhysicsAcousticsMicroelectromechanical SystemsVibrationMems CharacterizationMems ResonatorsMems SensorsMicromachiningPhysical AcousticsPiezoelectric MaterialsDampingDamping MechanismsDissipationMicromechanical OscillatorsMode DampingPiezoelectric ResonatorsVibrational ModesViscosity
Abstract Vibrational modes of higher order in micromachined resonators exhibit low damping in liquid environments, which facilitates accurate sensing even in highly viscous liquids. A steady increment in mode order, however, results in sound dissipation effects at a critical mode number n crit , which drastically increases damping in the system. Basic understanding in the emerging of sound dissipation in micromachined resonators is therefore of utmost importance, when an application of higher mode orders is targeted. For that reason, we experimentally investigated in this paper the appearance of sound dissipation in higher order non-conventional vibrational modes in MEMS plate resonators in liquids. The results are compared to those of an analytical model and of finite element method analyses. Micromechanical piezoelectric resonators were fabricated and characterized in sample fluids with a dynamic viscosity μ fluid ranging from 1 to 5 mPa s and density values ρ fluid ranging from 0.774 up to 0.835 kg l −1 . Quality factors up to 333 are obtained for the eighth mode order in model solution with a dynamic viscosity of 1 mPa s. By monitoring the resonance and damping characteristics as a function of mode order, sound dissipation effects occur, observed by the detection of increased damping, starting at mode number n = 8, which is in good agreement to the predictions of an analytical model and to finite element method simulations. At the critical mode number n crit , a reduction in quality factor up to 50% is measured. The results show a direct correlation of n crit and the density of the fluid, which agrees to theory. The lowest value of 8 for n crit is obtained in a sample liquid with the lowest density value of 0.774 kg l −1 , followed by n crit = 9 in a sample liquid with ρ fluid = 0.782 kg l −1 and n crit = 10 in a sample liquid with ρ fluid = 0.835 kg l −1 . These findings are of particular interest for sensing applications in low dense liquids, as sound dissipation effects emerge even at lower mode numbers.
29
The free vibration of rectangular plates
A.W. Leissa · Journal of Sound and Vibration · 1973 · 1.2K citations
Engineering, Mechanical Engineering, Structural Dynamics +12
Method for the calibration of atomic force microscope cantilevers
John E. Sader, Ian Larson, Paul Mulvaney et al. · Review of Scientific Instruments · 1995 · 983 citations
Smart single-chip gas sensor microsystem
Christoph Hagleitner, Andreas Hierlemann, D. Lange et al. · Nature · 2001 · 614 citations
Engineering, Chemical Engineering, Electrical Engineering +12