Journal of Materials Research and Technology · 2020 · 21 citations · 34 references
Natural SciencesMaterials EngineeringMaterials ScienceCorrosion ScienceThin FilmsTribologyCoatingsCorrosion EngineeringCorrosion MechanismsCorrosion ResistanceCorrosion-resistant MaterialsElectrochemical CorrosionCharge Transfer ResistanceCorrosion Current DensityElectrochemical Impedance AnalysisElectrophoretic Deposition CoatingsPotentiodynamic PolarizationScratch TestingSurface CompositionThin Oxide Films
To improve the corrosion resistance performance of TiO2 thin films, a coating was prepared on 316 L stainless steel substrate following the electrophoretic deposition process. The structural, surface composition and morphological compositions of TiO2 films were analyzed by Scanning electron microscopy (SEM), Energy Dispersive Spectroscopy (EDS) and X-ray Diffraction (XRD), respectively. Micro-scratch tester was used to investigate the tribological properties and corrosion performance was examined employing electrochemical impedance spectroscopy (EIS) and Potentiodynamic polarization in 3.5 wt.% aqueous NaCl solution. Among the three coatings produced at three different applied voltages, film obtained under 30 V exhibited the lowest corrosion current density value of 0.212 µA as well as the highest charge transfer resistance (the corrosion resistance) and the double layer capacitance, which was attributed mainly to the significant decrease of micro-pore into the film.
34
A study of the tribological behaviour of TiO2 nano-additive water-based lubricants
Hui Wu, Jingwei Zhao, Wenzhen Xia et al. · Tribology International · 2017 · 237 citations · Full text
The crevice corrosion behaviour of stainless steel in sodium chloride solution
Qian Hu, Guoan Zhang, Yubin Qiu et al. · Corrosion Science · 2011 · 160 citations
Natural Sciences, Chemical Engineering, Materials Science +16