Semiconductor Physics Quantum Electronics & Optoelectronics · 2020 · 24 citations · 25 references
ArchitectureArchitectural EngineeringHeat TransferOptoelectronicsThermal AnalysisCooling SystemsEnergy-efficient LightingLight SourcesLighting ElectronicsLighting Energy ManagementPassive CoolingCooling System ArchitectureCooling System DesignLed LightingLight Emitting Diode LuminairesThermal Management For Lighting
Using the method of computer modelling, considered in this paper, is the optimization of a passive air system design for cooling the powerful LED luminaire based on heat pipes and cooling rings. Thermal and mass characteristics of the cooling system have been studied for various design parameters: distance between rings, thickness of ring materials, and thermal loads. It has been shown that, to provide a minimal case temperature of the LED source, the optimal distance between cooling rings should be 6 mm, but in this case, the mass of the cooling system is not least. To reduce the luminaire mass, it is reasonable to choose the distance between the cooling rings equal to 8 mm. Then the temperature of the light source increases by only 1.8 °С, or by 2.2%, while the mass of the cooling system reduces by 1357 g, or by 20.5%. At the same time, lowering the ring thickness from 2 to 0.8 mm can, in addition, reduce this mass by 2700 g, or by 48.6%. However, when doing so, the temperature of LED source case is increased by 5.9 °С. The offered cooling system based on heat pipes is capable of providing the thermal resistance 0.131 °С/W when scattering the thermal power 500 W under the maximum temperature of the LED source crystal 135.5 °С. Recommendations for the application of the developed cooling system have been formulated.
25
Hai Wang, Jian Qu, Youquan Peng et al. · Energy Conversion and Management · 2019 · 81 citations
Engineering, Materials Engineering, Mechanical Engineering +17
Yiyi Chen, Bo Li, Xin Wang et al. · Thermal Science and Engineering Progress · 2019 · 73 citations
Engineering, Electrical Engineering, Mechanical Engineering +17
Uwe Drofenik, Andrija Stupar, Johann W. Kolar · IEEE Transactions on Components Packaging and Manufacturing Technology · 2011 · 66 citations