IEEE Transactions on Terahertz Science and Technology · 2020 · 70 citations · 32 references
EngineeringElectrical EngineeringMicroelectronicsMicrowave EngineeringSemiconductor DevicesHigh-frequency Semiconductor DevicesIntegrated Circuit DesignMicrowave AmplifiersMicrowave Integrated CircuitsMicrowave Semiconductor DevicesRadio-frequency Integrated CircuitsCoplanar WaveguidesMillimeter-wave Integrated CircuitsMonolithic Microwave Integrated Circuit AmplifiersMonolithic Microwave Integrated CircuitsPower Amplifier DesignPower OutputSmall-signal GainSolid-state Power Amplifiers
In this article, we report on compact solid-state power amplifier (SSPA) millimeter-wave monolithic integrated circuits (MMICs) covering the 280-330-GHz frequency range. The technology used is a 35-nm gate-length InGaAs metamorphic high-electron-mobility transistor (mHEMT) technology. Two power amplifier MMICs are reported, based on a compact unit amplifier cell, which is parallelized two times using two different Wilkinson power combiners. The Wilkinson combiners are designed using elevated coplanar waveguide and air-bridge thin-film transmission lines in order to implement low-loss 70-Ω lines in the back-end-of-line of this InGaAs mHEMT technology. The five-stage SSPA MMICs achieve a measured small-signal gain around 20 dB over the 280-335-GHz frequency band. State-of-the-art output power performance is reported, achieving at least 13 dBm over the 286-310-GHz frequency band, with a peak output power of 13.7 dBm (23.4 mW) at 300 GHz. The PA MMICs are designed for a reduced chip width while maximizing the total gate width of 512 μm in the output stage, using a compact topology based on cascode and common-source devices, improving the output power per required chip width significantly.
32
35 nm metamorphic HEMT MMIC technology
Arnulf Leuther, A. Tessmann, R. Lösch et al. · 2008 · 95 citations