IEEE Journal of Solid-State Circuits · 2020 · 39 citations · 25 references
EngineeringElectrical EngineeringCircuit TheoryLow-power DesignPower ElectronicsCmos Circuit DesignConverter TopologiesRadio-frequency Integrated CircuitsResonant CircuitsResonant ConvertersWireless Power TransferCapacitorsConstant Current Constant Voltage ChargingConstant Voltage ChargingCurrent SensingResonant Power TransferWireless ChargingWireless Charging SystemsWireless Power Transfer Control
A 6.78-MHz fully integrated single-stage wireless charger with constant-current constant-voltage (CC-CV) charging technique for resonant wireless power transfer applications is presented. Based on the principle of three-mode reconfigurable resonant regulating (R <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> ) rectifier, the proposed charger achieves high efficiency and low cost by realizing power rectification, voltage regulation, and CC-CV charging in a single power stage. The power stage of the proposed charger consists of only four nMOS power transistors. A bootstrapping technique using a single-input-dual-output voltage doubler with adaptive phase control is also proposed to integrate bootstrap capacitors on-chip. The CC loop and the CV loop share the same pulsewidth modulation (PWM) controller with smooth transition from the CC mode to the CV mode. An on-chip current sensing and estimation circuit is specially designed for the CC loop. Fabricated in a standard 0.35-μm CMOS process with a die area of 8 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , the charger delivered a maximum charging current of 1.5 A, and the measured peak efficiency reached 92.3% and 91.4% when the charging currents were 1 A and 1.5 A, respectively.
25