Enhanced Conversion of Xylan into Furfural using Acidic Deep Eutectic Solvents with Dual Solvent and Catalyst Behavior

Abstract

An efficient process for the production of furfural from xylan by using acidic deep eutectic solvents (DESs), which act both as solvents and catalysts, is developed. DESs composed of cholinium chloride ([Ch]Cl) and malic acid or glycolic acid at different molar ratios, and the effects of water and γ-valerolactone (GVL) contents, solid/liquid (S/L) ratio, and microwave heating are investigated. The best furfural yields are obtained with the DES [Ch]Cl:malic acid (1:3 molar ratio)+5 wt % water, under microwave heating for 2.5 min at 150 °C, a S/L ratio of 0.050, and GVL at a weight ratio of 2:1. Under these conditions, a remarkable furfural yield (75 %) is obtained. Direct distillation of furfural from the DES/GVL solvent and distillation from 2-methyltetrahydrofuran (2-MeTHF) after a back-extraction step enable 89 % furfural recovery from 2-MeTHF. This strategy allows recycling of the DES/GVL for at least three times with only small losses in furfural yield (>69 %). This is the fastest and highest-yielding process reported for furfural production using bio-based DESs as solvents and catalysts, paving the way for scale-up of the process.