Effect of surface modification of electrodes on charge injection and dielectric characteristics of propylene carbonate

Abstract

Space charge injected into a liquid dielectric by an electrode under an impulse voltage causes the electric field to be distorted, which affects the dielectric's insulation performance. In this study, the authors study the surface modification of three‐electrode materials, namely aluminium, copper, and stainless steel, by sputtering of titanium dioxide (TiO 2 ) based on magnetron sputtering. The breakdown voltage of propylene carbonate and the surface morphology of the electrodes before and after modification were examined. Furthermore, the distribution of the space charge injected into the propylene carbonate from the different electrode materials was also measured based on the Kerr electro‐optic effect. These results indicate that the breakdown voltage of propylene carbonate increased by 7, 4, and 9% after surface modification of aluminium, copper, and stainless steel, respectively. After sputtering of TiO 2 , micro‐grooves on the surface of the three‐electrode materials became smooth, and the surface roughness decreased, which changed the barrier height of the solid–liquid interface. The space charge injection mode of the three‐electrode materials before and after surface modification was bipolar injection; however, the space charge injection amounts were markedly lower for the modified electrodes.