Energy Sources Part A Recovery Utilization and Environmental Effects · 2019 · 25 citations · 30 references
EngineeringAutomotive EngineeringChemical EngineeringBiochemical EngineeringCombustionInternal Combustion EnginesCombustion ProcessesDiesel TechnologyEngine EmissionsEngine PerformanceEngine TestingIgnitionBiodieselBiodiesel CombustionDiesel Engine CombustionDiesel EnginesFumigationIgnition DelayIgnition Delay EffectsLiquid Fuel Injection
This paper highlights the combustion, performance and emission characteristics of a diesel engine using 25% of rubber seed oil methyl ester-diesel blend (RSME25) with different proportions of Dimethyl carbonate (DMC) (10%, 20%, and 30%) inducted through fumigation technique. Fumigation is a method of injecting liquid fuel (DMC) in a vaporized form into the intake manifold and the biodiesel blend is injected into the engine cylinder directly through the fuel injector in a diesel engine. The experiment was conducted in a diesel engine, fueled with 25% rubber seed oil methyl ester blends with diesel (RSME25) and different proportions of Dimethyl carbonate (10%, 20%, and 30%) fumigation with the help of a vaporizer and an injector. The results indicated that RSME25 with fumigation of DMC showed an overall ignition delay of 3°CA was increased for all the percentage of fumigation as compared with diesel and RSME25 without fumigation at full load. Also, the RSME25 with 30% of fumigated DMC gave improved performance and reduction in exhaust gas emissions than other proportions. The nitric oxide (NO) emission and smoke opacity were found to be lowered by 28% and 36%, respectively, for RSME25 with 30% DMC fumigation, when compared to diesel at full load.
30
S. Jindal, B.P. Nandwana, Narendra Singh Rathore et al. · Applied Thermal Engineering · 2009 · 387 citations
Engineering, Chemical Engineering, Mechanical Engineering +16