A High-Sensitivity Resonant Tangential E-Probe With Loaded Improved Dipole and Embedded Integrated Balun

Jianwei Wang, Zhaowen Yan, Wei Liu, Donglin Su, Xin Yan, Jun Fan

IEEE Transactions on Instrumentation and Measurement · 2019 · 56 citations · 9 references

Concepts

Abstract

In this paper, a high-sensitivity resonant probe for capturing tangential E-field component is fabricated on a four-layer printed circuit board. The resonant probe consists of an improved dipole employed to further enhance sensitivity, a resonator made up of open- and short-circuit stubs achieving specific resonance, and an integrated Marchand balun used to transform the differential-mode voltage to the single-end output and match the instrument port impedance match. Compared with the referenced broadband probe, the relative sensitivity of the proposed resonant probe in terms of |S <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">12</sub> | is enhanced by 13.21 and 14.82 dB for simulation and measurement, respectively. The absolute sensitivity in terms of the noise-equivalent field strength (NEFS) is 26.4 dBμV(Hz) <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1/2</sup> . The measurements of the passive circuits (microstrip lines and coupled lines) and active circuit module are conducted to validate the resonant probe.

References

9