Scientific Reports · 2019 · 146 citations · 47 references
EngineeringBioengineeringManufacturing EngineeringBiomemsBiosensorsMicrofabricationMicrofabrication ProcessesMicrofluidic Device FabricationMicrofluidic DevicesMicrofluidic SystemsMicrofluidicsPrinting TechniquesHydrophobic FeaturesMicrofluidic Diagnostic DevicesMicrofluidic Diagnostic PlatformsMicrofluidic FabricationPaper-based Analytical DevicesPaper-based Diagnostic DevicesPaper-based MicrofluidicsPaper-based Microfluidics Fabrication
Microfluidic paper‑based analytical devices (µPADs) offer portable, low‑cost diagnostics, yet their widespread adoption is hindered by complex, expensive fabrication processes. This study introduces a simple, laser‑printer‑based fabrication method that dramatically cuts the cost and complexity of µPAD production. The method uses toner ink printed by a standard laser printer, then heated to melt the toner and form hydrophobic barriers that guide fluid wicking across the paper substrate. The resulting devices were successfully used to perform two assays, demonstrating rapid prototyping capability and strong potential for deployment in both developed and resource‑constrained settings.
Abstract Microfluidic paper-based analytical devices (µPADs) have provided a breakthrough in portable and low-cost point-of-care diagnostics. Despite their significant scope, the complexity of fabrication and reliance on expensive and sophisticated tools, have limited their outreach and possibility of commercialization. Herein, we report for the first time, a facile method to fabricate µPADs using a commonly available laser printer which drastically reduces the cost and complexity of fabrication. Toner ink is used to pattern the µPADs by printing, without modifying any factory configuration of the laser printer. Hydrophobic barriers are created by heating the patterned paper which melts the toner ink, facilitating its wicking into the cross-section of the substrate. Further, we demonstrate the utilization of the fabricated device by performing two assays. The proposed technique provides a versatile platform for rapid prototyping of µPADs with significant prospect in both developed and resource constrained region.
47
NIH Image to ImageJ: 25 years of image analysis
Caroline A Schneider, Wayne Rasband, Kevin W. Eliceiri · Nature Methods · 2012 · 65.2K citations