Concepedia

Publication | Closed Access

Ferroelectric AlN ultrathin films prepared by atomic layer epitaxy

10

Citations

14

References

2019

Year

Abstract

Wurtzite aluminum nitride (AlN) of space group P63mc has long been recognized as a non-ferroelectric material, lacking the polarization switching ability. This paper reports the induction of ferroelectricity in a single crystalline epitaxial AlN ultrathin film with a thickness of 8−10 nm. The ferroelectric AlN epilayer was grown on a single crystalline GaN layer, forming a [0001]-oriented AlN/GaN epitaxial heterostructure with two reversible polar variants: [000-1] and [0001]. The AlN epilayer exhibited soft ferroelectricity with large switching currents and a polarization value of ~3.0 &mu;Ccm<sup>-2</sup> during a 180&deg; polarization switch. The AlN epilayer was prepared by the atomic layer deposition technique at 300&deg;C in conjunction with in-situ atomic layer annealing. The two-dimensional electron gas (2DEG) at the AlN/GaN interface could be manipulated by the ferroelectric switching in the AlN epilayer. Strain engineering via lattice mismatch at the AlN/GaN interface was the key to creating a ferroelectric AlN/GaN heterojunction. Based on the reciprocal space mapping analysis, the AlN ferroelectricity is believed to be stemming from the out-of-plane compressive strain and inplane tensile strain present in the [0001]-oriented AlN epilayer. The discovery of low-temperature prepared, CMOScompatible AlN ultrathin films with soft ferroelectric characteristics will undoubtedly spur new fundamental and applied research in low-dimensional ferroelectric systems based on the AlN/GaN heterojunction.

References

YearCitations

Page 1