NASA STI Repository (National Aeronautics and Space Administration) · 13 citations · 0 references
Open access
EngineeringAerospace EngineeringComputer ScienceExperimental DesignFlight MechanicsHuman-robot InteractionDocking SystemsFlight SimulationHuman-machine InteractionHuman-robot Interaction EvaluationSpacecraft Proximity OperationsSpacecraft RendezvousDocking ControlFlight Path SimulationHuman Factors In Collision AvoidanceHuman Factors TestingHuman-in-the-loop DockingMan-machine Control InterfacesPilot-in-the-loop SimulationSpacecraft Docking
The anticipated increase in rendezvous and docking activities in the various space programs in the Space Station era necessitates a renewed interest in manual docking procedures. Ten test subjects participated in computer simulated docking missions in which the influence of initial velocity was examined. All missions started from a resting position of 304.8 meters (1000 feet) along the space station's +V-bar axis. Test subjects controlled their vehicle with a translational hand controller and digital auto pilot which are both virtually identical to their space shuttle counterparts. While the 0.1 percent rule (range rate is equal to 0.1 percent of the range) used by space shuttle pilots is comfortably safe, it is revealed to be extremely inefficient in terms of time and not justifiable in terms of marginal safety. Time is worth money, not only because of training and launch costs, but because the sooner a pilot and spacecraft return from a mission, the sooner they can begin the next one. Inexperienced test subjects reduced the costs of simulated docking by close to a factor of 2 and achieved safe dockings in less than 4 percent of the time the baseline approach would entail. This reduction in time can be used to save lives in the event of an accident on orbit, and can tremendously reduce docking costs if fuel is produced from waste water on orbit.