A 25-Gb/s 270-mW Time-to-Digital Converter-Based <inline-formula> <tex-math notation="LaTeX">$8{\times}$ </tex-math> </inline-formula> Oversampling Input-Delayed Data-Receiver in 45-nm SOI CMOS

Sami Ur Rehman, Mohammad Mahdi Khafaji, Corrado Carta, Frank Ellinger

IEEE Transactions on Circuits and Systems I Regular Papers · 2018 · 15 citations · 31 references

Concepts

Abstract

This paper presents a time-to-digital converter-based oversampling input-delayed multi-standard adaptable data-receiver architecture which digitizes transitions/threshold-crossings and inter-transition distances inside a time-varying binary input symbol sequence. The presented circuit works by sampling delayed replicas of a threshold-crossing binary input symbol sequence inside a differential delay-line. The resulting sampled digital word carries information of the threshold-crossings and the distances between them. The proposed 64-tapped adaptable-delay-line-based design is intended as a high-rate oversampling baseband binary quantizer for a high-speed serial link. The data-receiver has been demonstrated to digitize up to 25-Gb/s input binary symbol sequences with an oversampling ratio of eight. Designed in a 45-nm SOI CMOS process, the receiver circuit is fully characterized by applying different symbol sequences at its input while setting its time resolution and dynamic-range/delay to 5 and 320 ps, respectively. Under these conditions, the data-receiver consumes 270 mW of power, and achieves an energy conversion figure of 1.62-4.32 pJ/sampled-digital-bit. The circuit occupies 0.24 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> of active silicon area. The proposed receiver offers one of the highest time-resolution and oversampling factor, and among the best energy conversion figures compared with the oversampling time-mode receiver architectures reported so far.

References

31