Materials · 2018 · 94 citations · 36 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor MaterialsThin FilmsMetal OxidesOxide SemiconductorsSemiconductor Thin FilmsSurface PhysicsThin Film Electrical PropertiesThin-film MaterialsBinary Metal OxidesCarrier ConcentrationField EmissionKelvin Probe Force MicroscopyPhysical PropertiesThin Oxide FilmsThin Oxide LayersWork Function
P-type binary copper oxide semiconductor films for various O2 flow rates and total pressures (Pt) were prepared using the reactive magnetron sputtering method. Their morphologies and structures were detected by X-ray diffraction, Raman spectrometry, and SEM. A phase diagram with Cu2O, Cu4O3, CuO, and their mixture was established. Moreover, based on Kelvin Probe Force Microscopy (KPFM) and conductive AFM (C-AFM), by measuring the contact potential difference (VCPD) and the field emission property, the work function and the carrier concentration were obtained, which can be used to distinguish the different types of copper oxide states. The band gaps of the Cu2O, Cu4O3, and CuO thin films were observed to be (2.51 ± 0.02) eV, (1.65 ± 0.1) eV, and (1.42 ± 0.01) eV, respectively. The resistivities of Cu2O, Cu4O3, and CuO thin films are (3.7 ± 0.3) × 103 Ω·cm, (1.1 ± 0.3) × 103 Ω·cm, and (1.6 ± 6) × 101 Ω·cm, respectively. All the measured results above are consistent.
36
Kelvin probe force microscopy and its application
Wilhelm Melitz, Jian Shen, Andrew C. Kummel et al. · Surface Science Reports · 2010 · 1.6K citations
Binary copper oxide semiconductors: From materials towards devices
Bertrand Meyer, A. Polity, Daniel Reppin et al. · physica status solidi (b) · 2012 · 722 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17