IEEE Electron Device Letters · 2018 · 78 citations · 21 references
EngineeringMaterials EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSensorsMechanical SensorsMicroelectromechanical SensorsPressure SensorsSensor MaterialsSoft SensorsThin-film TransistorsAmorphous Indium Gallium Zinc OxideAmplificationElectronic SkinFlexible Pressure SensorsPolydimethylsiloxane Device FabricationPressure SensingResponse TimeWearable Health Devices
The development of flexible and highly sensitive pressure sensors is critical for the realization of wearable health monitors and electronic skins. However, the sensitivity, flexibility, and large-area fabrication of pressure sensors remain the key challenges for their practical applications. In this letter, we present a novel pressure sensing system in an amorphous indium-gallium-zinc oxide (a-IGZO) thin film transistor (TFT) configuration comprised of a microstructured polydimethylsiloxane (PDMS) capacitor fabricated on a 200 mm × mm flexible substrate. The microstructured PDMS thin film shows the average sensitivity of 0.1 kPa <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-1</sup> and response time of <;190 ms for the pressure of 12 kPa. Through the amplification effect of the a-IGZO TFT, the device shows a high sensitivity in the subthreshold region for ultra-low-pressure regime (≤1.5 kPa) detection and good linearity in the linear region for low-pressure regime (≤7 kPa) detection. These results demonstrate a novel approach to pressure-sensing intelligent products.
21