2018 · 28 citations · 11 references
EngineeringElectrical EngineeringMicroelectronicsMicrowave EngineeringSemiconductor DevicesHigh-frequency Semiconductor DevicesMicrowave Integrated CircuitsMicrowave Semiconductor DevicesRadio-frequency Integrated CircuitsWide Band Gap SemiconductorsWide-bandgap SemiconductorsBandwidthGallium Nitride Microwave Integrated CircuitsGan-based High-frequency DevicesHigh-electron-mobility TransistorsInsertion LossInsertion Loss MeasurementMillimeter-wave Integrated CircuitsRf Switches
This paper reports on W-band (75 to 110 GHz) single-pole double-throw (SPDT) switch millimeter-wave integrated circuits (MMICs) based on a planar and a tri-gate 100-nm gate-length GaN high-electron-mobility transistor (HEMT) technology. The SPDT switches utilize the well-established quarter-wave stub topology with shunt transistors. For an improved wideband performance, an optimized layout approach is used that connects the shorted stub for the compensation of the capacitance of a shunt transistor at the center of the transistor. The presented SPDT switch MMIC demonstrates for both technology versions a measured average insertion loss of 1.3 dB over the entire W-band with a peak insertion loss of 1.2 and 1.1 dB in the center of the W-band for planar and tri-gate HEMTs, respectively. The one-dB bandwidth is for both MMICs almost an octave. For an input power of at least 25 dBm, both SPDT switches do not show an indication of compression.
11
Robert L. Schmid, Peter Song, Christopher T. Coen et al. · IEEE Transactions on Microwave Theory and Techniques · 2014 · 100 citations
A BiCMOS W-Band 2×2 Focal-Plane Array With On-Chip Antenna
Zhiming Chen, Chun‐Cheng Wang, Hsin-Cheng Yao et al. · IEEE Journal of Solid-State Circuits · 2012 · 88 citations
A high-power, low-loss W-band SPDT switch using SiGe PIN diodes
Peter Song, Robert L. Schmid, Ahmet Çağrı Ulusoy et al. · 2014 · 48 citations