IEEE Transactions on Microwave Theory and Techniques · 2017 · 38 citations · 9 references
EngineeringElectrical EngineeringMicroelectronicsMicrowave EngineeringSemiconductor DevicesHigh-frequency Semiconductor DevicesIntegrated Circuit DesignMicrowave AmplifiersMicrowave Integrated CircuitsPower AmplifiersRadio-frequency Integrated CircuitsAverage GainHigh-gain AmplifiersMicrowave Amplifier DesignMillimeter-wave Integrated CircuitsPower Amplifier DesignPower OutputSmall-signal GainWideband Amplifiers
This paper reports on a broadband high-power amplifier (HPA) millimeter-wave integrated circuit (MMIC) covering the extended W-band (65-125 GHz). The MMIC is based on the Fraunhofer IAF 50-nm gate-length metamorphic high-electron-mobility transistor (mHEMT) technology. The HPA consists of two parallelized unit amplifiers. Each unit amplifier (UA) utilizes four stacked-HEMT unit power cells (UPCs) and four-way power combiners at the input and output. The UPCs stack four transistors with a gate width of 4 × 40 μm per HEMT. The UA achieves an average small-signal gain of 19.4 dB and an average saturated output power of 21.6 dBm at least from 70 to 110 GHz. The HPA yields an average small-signal gain of 16.8 dB and an average saturated output power of 22.5 dBm at least from 68 to 110 GHz. A peak output power of 24.1 dBm is achieved at an operating frequency of 75 GHz.
9
450 GHz amplifier MMIC in 50 nm metamorphic HEMT technology
A. Leuther, A. Tessmann, R. Aidam et al. · 2012 · 38 citations