Journal of Materials Processing Technology · 2017 · 111 citations · 29 references
EngineeringMaterials EngineeringMaterials ScienceMicrofabricationPhotonicsSurface ScienceLaser Material ProcessingLaser OpticsLaser PhysicsLaser Surface ProcessingStainless SteelsUltrafast OpticsContact Angle MeasurementsHigh-aspect-ratio StructuresHigh-aspect-ratio Surface StructuresInterference PatternsLaser FluenceLaser MicromachiningStatic Contact Angle MeasurementWater Contact Angle
We have studied the fabrication of line-like and pillar-like periodic microstructures on stainless steel by means of direct laser interference patterning. A picosecond (10 ps) pulsed Nd:YAG laser operating at 1064 nm wavelength was used to produce the microstructures with spatial periods ranging from 2.6 μm to 5.2 μm. By varying the laser parameters (laser fluence, pulse-to-pulse overlap) structure depths ranging from 500 nm to nearly 11.5 μm could be obtained. Furthermore, low and high frequency laser induced periodic surface structures (LIPSS) have been generated, resulting in three-level multi-scaled patterns. The orientation of the laser induced periodic structures with respect to the interference patterns could be adjusted by controlling the laser beam polarization. Finally, static water contact angle measurements are performed to investigate its correlation with the surface morphology. The treated surfaces are characterized using confocal and scanning electron microscopy.
29
Femtosecond, picosecond and nanosecond laser ablation of solids
Boris N. Chichkov, C. Momma, Stefan Nolte et al. · Applied Physics A · 1996 · 2.9K citations
Simple technique for measurements of pulsed Gaussian-beam spot sizes
J. M. Liu · Optics Letters · 1982 · 1.8K citations