A 980μW 5.2dB-NF current-reused direct-conversion bluetooth-low-energy receiver in 40nm CMOS

Amir Hossein Masnadi Shirazi, Hossein Miri Lavasani, Mojtaba Sharifzadeh, Yashar Rajavi, Shahriar Mirabbasi, Mazhareddin Taghivand

2017 · 16 citations · 7 references

Concepts

Abstract

This work presents a 980μW direct-conversion BLE receiver at a 1V supply, employing current-reuse and subthreshold techniques. The receiver has a measured noise figure of 5.2dB, integrated from 10kHz to 1MHz, that corresponds to a sensitivity of -95.8dBm. At a receiver gain of 47dB, an IIP3 of -19.7dBm has been measured. The LO integrated phase noise at 2.4GHz is 0.83° with LO spot phase noise of -119.9dBc/Hz at 3MHz frequency offset. The PLL is compacted inside the VCO inductor and has LC-VCO with a tuning range of 4.55GHz to 5.15GHz. Multiple μW-level feedback control loops are used in the design to make it robust over PVT variation. The prototype is implemented in a 40nm LP CMOS process occupying a silicon area of 0.7mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . To the best of our knowledge, the proposed receiver achieves the highest reported figure of merit among the BLE receivers published in the literature.

References

7