IEEE Transactions on Microwave Theory and Techniques · 2017 · 35 citations · 28 references
EngineeringElectrical EngineeringAnalog ElectronicsLow-power DesignMicroelectronicsAnalog Integrated CircuitsCmos Circuit DesignDifferential AmplifiersHigh-frequency Semiconductor DevicesMixed-signal Integrated Circuit DesignRadio-frequency Integrated CircuitsBandwidth ExtensionBandwidth Extension TechniquesCmos Analog Circuit DesignCmos Differential AmplifiersDifferential Amplifier StagesGroup DelayPower ConsumptionWideband Amplifier Design
This paper reports an area-efficient and tunable bandwidth (BW)-extension technique for a wideband CMOS amplifier to handle very high rate (50+ Gb/s) signaling while keeping a low jitter penalty. We identify its architectural advantages by correlating the performances with the frequency domain (magnitude and group delay (GD) responses) and time domain (impulse and step responses) and comparing them with the existing solutions. Specifically, our technique enables a flexible ac characteristic by introducing a tunable grounded active inductor in the bridged-shunt peaking topology, offering: 1) a high BW enhancement ratio (BWER = 2.65×); 2) BW-power scalability with small in-band gain variation; and 3) fine tunability of the passband gain without affecting the BW, GD, and power. The experimental prototype is a 65-nm CMOS four-stage differential amplifier occupying just 0.0077 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> . It delivers a 15-dB gain over a 43-GHz BW with 45-mW power consumption. Small in-band gain variation (0.58 dB) and ripple (1.53 dB) are concurrently achieved with low in-band GD variation (17 to 35.3 ps) and ripple (18.3 ps). The achieved figure of merit of 5.48 [(dc Gain × BW)/Power] compares favorably with the prior art.
28