Journal of Physics Conference Series · 2017 · 25 citations · 8 references
EngineeringAutomotive EngineeringMechanical EngineeringCombustionComputational Fluid DynamicsMultiphase FlowCombustion FundamentalsCombustion ProcessesEngine ModelingEngine TestingMultiphase Flow SimulationSpray CombustionDiesel CombustionDiesel Engine CombustionInjection PressureSpray BreakupSpray Droplet BehaviorSpray FormationSpray PenetrationSpray Penetration Dynamics
Mixture formation of the ignition process is a key element in the diesel combustion as it influences the combustion process and exhaust emission. Aim of this study is to elucidate the effects of nozzle diameter, injection pressure and ambient temperature to the formation of spray. This study investigated diesel formation spray using Computational Fluid Dynamics. Multiphase volume of fluid (VOF) behaviour in the chamber are determined by means of transient simulation, Eulerian of two phases is used for implementation of mixing fuel and air. The detail behaviour of spray droplet diameter, spray penetration and spray breakup length was visualised using the ANSYS 16.1. This simulation was done in different nozzle diameter 0.12 mm and 0.2 mm performed at the ambient temperature 500 K and 700 K with different injection pressure 40 MPa, 70 MPa and 140 MPa. Results show that high pressure influence droplet diameter become smaller and the penetration length longer with the high injection pressure apply. Smaller nozzle diameter gives a shorter length of the breakup. It is necessary for nozzle diameter and ambient temperature condition to improve the formation of spray. High injection pressure is most effective in improvement of formation spray under higher ambient temperature and smaller nozzle diameter.
8
Amir Khalid, Keisuke Hayashi, Yoshiyuki Kidoguchi et al. · SAE technical papers on CD-ROM/SAE technical paper series · 2011 · 62 citations
Engineering, Chemical Engineering, Mechanical Engineering +17
PERFORMANCE AND EMISSIONS CHARACTERISTICS OF CRUDE JATROPHA OIL BIODIESEL BLENDS IN A DIESEL ENGINE
Amir Khalid, Norrizam Jaat, Azwan Sapit et al. · International Journal of Automotive and Mechanical Engineering · 2015 · 43 citations · Full text
Engineering, Chemical Engineering, Mechanical Engineering +17