Engineering of Ferroelectric HfO<sub>2</sub>–ZrO<sub>2</sub> Nanolaminates

Stephen L. Weeks, Ashish Pal, V. Narasimhan, Karl A. Littau, Tony Chiang

ACS Applied Materials & Interfaces · 2017 · 136 citations · 32 references

Concepts

Abstract

In this work, the ferroelectric properties of nanolaminates made of HfO 2 and ZrO 2 were studied as a function of the deposition temperature and the individual HfO 2 /ZrO 2 layer thickness before and after electrical field cycling. The ferroelectric response was found to depend on the structure of the nanolaminates before any postdeposition annealing treatment. After annealing with a TiN cap, an “antiferroelectric-like” response was obtained from nanolaminates deposited in an amorphous state at a lower temperature, whereas a ferroelectric response was obtained from nanolaminates deposited at a higher temperature, where crystallites were detected in thick films before annealing. As the individual layer thicknesses were decreased, an increased lattice distortion and a concurrent increase in remanent polarization were observed from the nanolaminates deposited at high temperatures. After field cycling, nanolaminates deposited at lower temperatures exhibited an antiferroelectric-like to ferroelectric transition, whereas those deposited at higher temperatures exhibited a larger remanent polarization. Finally, we demonstrate that by leveraging the proper choice of process conditions and layer thickness, remanent polarizations exceeding those of the HfZrO 4 solid solution can be obtained.

References

32