Chinese Physics Letters · 2016 · 40 citations · 15 references
EngineeringMaterials EngineeringMaterials ScienceMicroelectronicsSemiconductor DevicesSemiconductor MaterialsDevice SimulationOxide SemiconductorsPhotovoltaic DevicesSemiconductor Device MaterialsSemiconductor InterfacesSolar CellsBand Offset EngineeringCell EfficiencyConduction BandElectron Transport LayersEnergy Conversion EfficiencyPhotovoltaic Performance AnalysisSolar Cell Device Physics
The Cu2ZnSnS4 (CZTS)-based solar cell is numerically simulated by a one-dimensional solar cell simulation software analysis of microelectronic and photonic structures (AMPS-1D). The device structure used in the simulation is Al/ZnO:Al/nZn(O,S)/pCZTS/Mo. The primary motivation of this simulation work is to optimize the composition in the ZnO1−xSx buffer layer, which would yield higher conversion efficiency. By varying S/(S+O) ratio x, the conduction band offset (CBO) at CZTS/Zn(O,S) interface can range from −0.23 eV to 1.06 eV if the full range of the ratio is considered. The optimal CBO of 0.23 eV can be achieved when the ZnO1−xSx buffer has an S/(S+O) ratio of 0.6. The solar cell efficiency first increases with increasing sulfur content and then decreases abruptly for x > 0.6, which reaches the highest value of 17.55% by our proposed optimal sulfur content x = 0.6. Our results provide guidance in dealing with the ZnO1−xSx buffer layer deposition for high efficiency CZTS solar cells.
15
Development of CZTS-based thin film solar cells
Hironori Katagiri, Kazuo Jimbo, Win Shwe Maw et al. · Thin Solid Films · 2008 · 1.1K citations
Thermally evaporated Cu2ZnSnS4 solar cells
Kai Wang, Oki Gunawan, Teodor K. Todorov et al. · Applied Physics Letters · 2010 · 646 citations
Takashi Minemoto, Takuya Matsui, Hideyuki Takakura et al. · Solar Energy Materials and Solar Cells · 2001 · 646 citations