Bioresource Technology · 2016 · 104 citations · 31 references
Natural SciencesChemical EngineeringChemistryCatalysisIndustrial ChemistryInorganic ChemistryAlgal BiotechnologyBiofuel ProductionIndustrial CatalysisIndustrial Catalytic ProcessesAlgal Biofuel ProductionAlgal Biomass ConversionAlgal Biomass ProcessingBio-oil UpgradingBiofuel Production From Green AlgaeBiomass Conversion CatalysisPyrolysis
Cyanobacteria were catalytically pyrolyzed over Mg-Al layered double oxide/ZSM-5 composites (MgAl-LDO/ZSM-5) to produce bio-oil. MgAl-LDO/ZSM-5 with a Mg/Al molar ratio of four was proved to be the best catalyst. Under the optima condition that the final temperature was 823K, heating rate was 10K/min and catalyst/algae mass ratio was 0.75, a maximum yield of liquid (41.1%) was achieved at 823K with a heating rate of 10K/min and a catalyst/algae mass ratio of 0.75, which was much higher than the one obtained without catalyst. The element analysis results proved that this bio-oil had much lower O/C molar ratio and higher HHV. The GC-MS results showed that the bio-oil had less nitrogenous compounds. MgAl4-LDO/ZSM-5 was proved to be an applicable and effective catalyst to obtain bio-oil from catalytic pyrolysis of water-blooming algae.
31
Overview of Applications of Biomass Fast Pyrolysis Oil
Stefan Czernik, A.V. Bridgwater · Energy & Fuels · 2004 · 2.9K citations
Structure and Surface and Catalytic Properties of Mg-Al Basic Oxides
J.I. Di Cosimo, V.K. Dı́ez, M. Xu et al. · Journal of Catalysis · 1998 · 1.2K citations
Natural Sciences, Materials Engineering, Materials Science +14