Fabrication of capacitive micromachined ultrasonic transducers based on adhesive wafer bonding technique

Abstract

This paper reports the fabrication process of wafer bonded capacitive micromachined ultrasonic transducers (CMUTs) using photosensitive benzocyclobutene as a polymer adhesive. Compared with direct bonding and anodic bonding, polymer adhesive bonding provides good tolerance to wafer surface defects and contamination. In addition, the low process temperature of 250 °C is compatible with standard CMOS processes. Single-element CMUTs consisting of cells with a diameter of 46 µm and a cavity depth of 323 nm were fabricated. In-air and immersion acoustic characterizations were performed on the fabricated CMUTs, demonstrating their capability for transmitting and receiving ultrasound signals. An in-air resonance frequency of 5.47 MHz was measured by a vibrometer under a bias voltage of 300 V.