2008 · 15 citations · 8 references
EngineeringElectrical EngineeringMaterials ScienceElectronic MaterialsSemiconductor DevicesSemiconductor MaterialsPhotovoltaic DevicesSemiconductor Device MaterialsSemiconductor HeterostructuresSemiconductor InterfacesSemiconductor Thin FilmsSolar CellsAmorphous SiliconAnti-reflection CoatingsCrystalline SiliconDevice FabricationFill FactorOpen-circuit VoltageSilicon NitrideSolar Cell Fabrication
In this paper we investigate in detail how the heterostructure concept can be implemented in an interdigitated back contact solar cell, in which both the emitters are formed on the back side of the c-Si wafer by amorphous/crystalline silicon heterostructure, and at the same time the grid-less front surface is passivated by a double layer of amorphous silicon and silicon nitride, which also provides an anti-reflection coating. The entire process, held at temperature below 300degC, is photolithography-free, using a metallic self-aligned mask to create the interdigitated pattern. An open-circuit voltage of 695 mV has been measured on this device fabricated. The mask-assisted deposition process does not influence the uniformity of the deposited amorphous silicon layers. Several technological aspects that limit the fill factor are considered and discussed.
8
Obtaining a higherVoc in HIT cells
Mikio Taguchi, Akira Terakawa, Eiji Maruyama et al. · Progress in Photovoltaics Research and Applications · 2005 · 277 citations · Full text