Micromachines · 2016 · 11 citations · 9 references
EngineeringMechanical EngineeringMicroelectromechanical SystemsMicrofabricationVibrationLateral VibrationNonlinear VibrationOscillatorsResonant DynamicsVibration MeasurementMicroresonatorsNonlinear Dynamic ResponseNonlinear ResonatorsQuality FactorsResonator ModelingResonator Quality FactorSignal-to-noise RatioVibration Modeling
Microresonators are popular structures used in a variety of applications. They generally operate in the linear region where the vibration amplitude is limited, thereby limiting the signal-to-noise ratio. The nonlinear vibration region, where amplitudes and, consequently, the signal-to-noise ratio are relatively large, is generally avoided owing to instabilities and complexities in analysing the vibrations. In this work, a nonlinear dynamic model with a damping constant obtained from Monte Carlo simulation was derived to describe the vibration responses of microresonators operating in the nonlinear region. A laterally oscillating comb-drive driven resonator was designed, fabricated and characterized at various pressures and driving signals to validate the model. A simple method to extract the quality factor of the resonator in the nonlinear region was also proposed. The measured quality factors were compared with those obtained from the nonlinear model and a good agreement was obtained.
9
Nonlinear Limits for Single-Crystal Silicon Microresonators
V. Kaajakari, T. Mattila, A. Oja et al. · Journal of Microelectromechanical Systems · 2004 · 397 citations
Large-amplitude MEMS electret generator with nonlinear spring
Daigo Miki, Makoto Honzumi, Yuji Suzuki et al. · 2010 · 61 citations
Engineering, Electrical Engineering, Mechanical Engineering +16