Measurement of CO<sub>2</sub>Solubility in NaCl Brine Solutions at Different Temperatures and Pressures Using the Potentiometric Titration Method

Erfan Mohammadian, Hossein Hamidi, Mohammad Asadullah, Amin Azdarpour, Shervin Motamedi, Radzuan Junin

Journal of Chemical & Engineering Data · 2015 · 83 citations · 28 references

Concepts

Abstract

The solubility of CO 2 in brine is one of the trapping mechanisms by which the CO 2 is sequestrated in aquifers. In this research, an unconventional method, called the potentiometric titration, was used to obtain the solubility of CO 2 in distilled water and NaCl brine. The solubility data for the low salinity range are scarce in the literature. Thus, in this research, the CO 2 solubility was obtained in NaCl brines of low salinity (0–15 000 ppm) at temperatures between 60 °C and 100 °C and pressures up to 25 MPa. Moreover, the salting-out effect was estimated using the Setchenov’s constant as a measure of reduction in solubility when salt is added to the solution. The solubility points obtained by the potentiometric titration method demonstrated very good consistency with those obtained by the previous methods.

References

28