Chalmers Publication Library (Chalmers University of Technology) · 2007 · 26 citations · 0 references
EngineeringAutomotive EngineeringMechanical EngineeringTribologyVehicle Safety EngineeringVehicle TestingTire MechanicsTire TestingFrictionFriction EstimationFriction MeasurementFriction Prediction ModelsRoad Friction EstimationTire FrictionTire-road FrictionTire-road Friction Modeling
This project is part of the Swedish IVSS program. The aim of IVSS is to stimulate research and development for the road safety of the future. Road conditions with low friction have been identified as a frequent cause of traffic accidents. Therefore, technology to automatically\ndetect changes in road conditions and alert the driver or take proper actions with active driver support systems would be a key contribution to increased road safety.\nThe aim of this project was to investigate the possibilities to estimate the tire to road friction.\nThree different approaches have been developed and evaluated, from concept to early prototypes in test vehicles. In the first method, the estimation of the coefficient of friction is based on the forces and torques that are produced at the front tires at cornering maneuvers.\nThe second method is based on a physical model of the tire behavior and estimates road friction from information on the forces that are produced at straight driving. The third method is based on an optical sensor that classifies the road surface ahead of the vehicle.\nThe three methods have been successfully evaluated in proving ground and public road tests in summer and winter conditions with different tires, and have been compared with reference measurements. The conclusion is that all three methods can be used for tire to road friction\nestimation and are recommended for further development and industrialization.