The Journal of Physical Chemistry C · 2011 · 11 citations · 30 references
Natural SciencesMaterials EngineeringMaterials ScienceElectronic MaterialsMaterials ChemistrySemiconductor MaterialsConducting PolymersConductive PolymersPhotovoltaic DevicesPhotovoltaic MaterialsSolar Cell MaterialsSolar CellsCharge TransportElectron Transport LayersEnergy Conversion EfficiencyHole TransportHole Transport LayersPower ConversionPower Conversion EfficiencySurface Potential
We offer a novel approach to improve the performance of P3HT/TiO 2 hybrid photovoltaic devices by incorporating either hydroxyl- or amino-functionalized silica nanodots (SND–OH or SND–NH 2 ) into the hole transport layer of the PEDOT:PSS. The SNDs serve as screens between conducting polymer and ionomer PSS to improve the phase separation and charge transport of the PEDOT:PSS hole transport layer. The power conversion efficiency (PCE) was thus improved by 1.45 and 2.61 fold for devices fabricated with PEDOT:PSS containing 1 wt % of SND–OH (SND–OH device) and 1 wt % of SND–NH 2 (SND–NH 2 device), respectively, when compared with the devices fabricated by neat PEDOT:PSS. The increase in PCE arises from an increase in short circuit currents, which are affected by the phase separation of PEDOT:PSS with possessing incorporated SNDs. The low surface potential of hydroxyl-functionalized SNDs (SND–OH) is easily aggregated in the PEDOT:PSS solution and forms large-sized phase separation in the PEDOT:PSS film. The aggregation of SND–OH causes slight decreases in the resistance of PEDOT:PSS thin film from (61 ± 1 to 69 ± 4)× 10 6 Ohm/square and a decrease in the shielding effects of the SNDs. In contrast, the high surface potential of amino-functionalized SNDs are dispersed uniformly in the PEDOT:PSS solution and form morphologies with small-sized domains in the PEDOT:PSS film. As a result, the sheet resistance of PEDOT:PSS thin films is decreased from (61 ± 1 to 46 ± 3) × 10 6 Ohm/square. Therefore, the SND–NH 2 device exhibits greater performance over the SND–OH devices.
30
Light-emitting diodes based on conjugated polymers
J. H. Burroughes, Donal D. C. Bradley, Adam R. Brown et al. · Nature · 1990 · 11.4K citations
Natural Sciences, Materials Engineering, Materials Science +12
Flexible light-emitting diodes made from soluble conducting polymers
G. Gustafsson, Yang Cao, George M. Treacy et al. · Nature · 1992 · 2.4K citations
Natural Sciences, Materials Engineering, Materials Science +12