2016 · 47 citations · 6 references
EngineeringElectrical EngineeringAnalog ElectronicsMicroelectronicsSensorsAnalog InstrumentationCmos Circuit DesignDigital Integrated CircuitsImage SensorsMixed-signal Integrated Circuit DesignMixed-signal IntegrationAnalog-to-digital ConversionAnalog-to-digital ConvertersCmos Analog Integrated CircuitsCmos Image SensorsHigh-speed OperationImage Sensor TechnologySensitivityThrough-silicon Vias
There is an increasing demand for high-reality video systems. The ITU-R has standardized video parameters for ultra-high-definition TV (UHDTV), and the full-specification video signal stated in this international standard is prescribed as having a 7,680 (H) × 4,320 (V) pixel count, 120Hz frame frequency with progressive scanning, 12b tone reproduction, and wide color gamut. A 33Mpixel 120fps CMOS image sensor with a 12b column-parallel analog-to-digital converter (ADC) is reported in [1]. In addition to standard operation, higher sensitivity, smaller pixels, and a higher frame rate of 240fps or more are required for CMOS image sensors. Backside-illuminated stacked CMOS image sensors [2] are effective for simultaneously achieving both high sensitivity for small pixels and high operation speed. However, these stacked structures are still insufficient for high-frame-rate UHDTV image sensors since the pixel wafer and the ASIC wafer are connected by through-silicon vias in the peripheral area.
6
A 1/4-inch 8Mpixel back-illuminated stacked CMOS image sensor
Sho Sukegawa, Taku Umebayashi, Tadaaki Nakajima et al. · 2013 · 191 citations
A 17.7Mpixel 120fps CMOS image sensor with 34.8Gb/s readout
Takayuki Toyama, Koji Mishina, Hiroyuki Tsuchiya et al. · 2011 · 120 citations
Kazuya Kitamura, Toshihisa Watabe, Takehide Sawamoto et al. · IEEE Transactions on Electron Devices · 2012 · 99 citations
Engineering, Computer Engineering, Electrical Engineering +17