Surface Engineering · 2016 · 11 citations · 30 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials ChemistryMechanical Behavior Of MaterialsThin FilmsComposite MaterialsNanocompositesThin Film Mechanical PropertiesCrystallographic OrientationCrystallographic Preferred OrientationCrystallographic TextureElastic ModulusMagnetron SputteringNitride Thin FilmsPreferred OrientationSputtering
a-C/(AlCrWTaTiNb)C x N y composite films are deposited by a magnetron sputtering technique using a carbon and mosaic target. The effect of carbon target power on chemical composition, morphology, microstructure and mechanical properties of a-C/(AlCrWTaTiNb)C x N y composite films is investigated. It is found that a multi-element nitride (AlCrWTaTiNb)N x film prepared without the carbon target demonstrates a triangle shape morphology with two-phase face-centred cubic structure (FCC). The crystallographic structure of the composite films changes into single-phase FCC and the morphology into granular when the carbon target power is in the range of 50–150 W. The preferred orientation of the composited films changes from (220) without the carbon target to (111) introducing carbon atoms. The maximum of micro-hardness and elastic modulus of a-C/(AlCrWTaTiNb)C x N y composite films deposited at 100 W carbon target power are 23 and 290 GPa, respectively. A corresponding H 3 / E 2 value reflecting film frictional characteristics also reaches a maximum of 0·147.
30