Drvna industrija · 2015 · 22 citations · 7 references
EngineeringForestryMaterials EngineeringBuilding MaterialsForest ManagementMaterials ProcessingMachiningSurface MetrologySurface RoughnessTimber MaterialsWood MaterialsWood ProductsMachining ProcessesMachining Surface QualityMachining-induced RoughnessNative Tree SpeciesRa Roughness AverageWood MachiningWood Surface MachiningWood Surface Properties
It is important to evaluate the effect of machining and wood machining properties on surface quality to determine and upgrade the data on wood machining properties and to defi ne convenient usage areas for some native wood species of Turkey. European black pine (Pinus nigra Arnold) and cedar of Lebanon (Cedrus libani A. Rich) are two softwood species and sessile oak (Quercus petraea Lieble) and black poplar (Populus nigra L.) are two hardwood species commonly used and grown in Turkey. These trees species were selected as experimental material for the study. Roughness measurements are signifi cant in the determination of wood surface quality for use as a fi nal product. This study evaluated roughness measurements after planing and sanding operations, and found that the highest value for average roughness (Ra) was observed as 6.780 m. in sessile oak, followed by black poplar at 6.338 m, cedar of Lebanon at 4.836 m, and black pine at 4.740 m. The average roughness values for wood in directions perpendicular to the grain and along the grain from highest to lowest were sessile oak, black poplar, black pine, and cedar of Lebanon.
7