OPTIMIZING THE WA FER DICING PROCESS

Udi Efrat

1993 · 11 citations · 2 references

Concepts

Abstract

As part of the semiconductor industry's move to general improvements in quality, the importance of controlling yield loss factors has increased. Wafer dicing is one of the critical elements of the IC assembly process where improvements can make a major contribution to yield. Chipping (damage along the cut line inherent to the wafer dicing operation) has been identified by semiconductor manufacturers as a relevant area for improvement. This paper describes a study of process factors that affect the magnitude of the chipping phenomenon. The goal of that study was to explore the limits of the current equipment. It is the result of a cooperative effort by a dicing saw manufacturer and several customers. First, cursory experiments were conducted to zero-in on significant factors. During this phase, several factors that were considered major causes for chipping, were found to have no significant effect. Then, A set of designed experiments was run. It identified chipping sensitivity to process parameters and pointed at an operating window that improved cut quality. Field tests in production environment confirmed the experimental results. During the study an automated method was developed for chipping measurement and an increase in yield was realized. This study represents an effective method of enhancing current generation equipment performance and providing useful information for designing future equipment.

References

2