2009 · 22 citations · 5 references
EngineeringElectrical EngineeringPhysicsMicroelectronicsPower ElectronicsSemiconductor DevicesAccelerator PhysicsHigh-frequency Power ConversionCell ConfigurationOutput Voltage Regulation
A Marx-topology klystron modulator is under development for the International Linear Collider (ILC) project. It is envisioned as a lower cost, smaller footprint, and higher reliability alternative to the present, bouncer-topology, baseline design. The application requires 120 kV (+/-0.5%), 140 A, 1.6 ms pulses at a rate of 5 Hz. The Marx constructs the high voltage pulse by combining, in series, a number of lower voltage cells. The Marx employs solid state elements; IGBTs and diodes, to control the charge, discharge and isolation of the cells. Active compensation of the output is used to achieve the voltage regulation while minimizing the stored energy. The developmental testing of a first generation prototype, P1, has been completed. This modulator has been integrated into a test stand with a 10 MW L-band klystron, where each is undergoing life testing. Development of a second generation prototype, P2, is underway. The P2 is based the P1 topology but incorporates an alternative cell configuration to increase redundancy and improve availability. Status updates for both prototypes are presented.
5
ILC Marx modulator development program status
C. Burkhart, T. Beukers, Mark A. Kemp et al. · 2009 · 22 citations
A HIERARCHICAL CONTROL ARCHITECTURE FOR A PEBB-BASED ILC MARX MODULATOR *
K.J.P. Macken, C. Burkhart, R. Larsen et al. · 2013 · 13 citations
Engineering, Electrical Engineering, Computer Architecture +12
A hierarchical control architecture for a PEBB-based ILC Marx modulator
K.J.P. Macken, C. Burkhart, R. Larsen et al. · 2009 · 12 citations · Full text
Engineering, Electrical Engineering, Computer Architecture +7