IEEE Transactions on Power Electronics · 2002 · 16 citations · 3 references
EngineeringElectrical EngineeringHeat TransferPower ElectronicsThermal AnalysisAc-dc ConversionAc-dc ConvertersDc-dc ConversionDc-dc ConvertersPower SystemsSwitch-mode Power SuppliesHigh-density Power ConversionPackaging For Power DevicesPower DensityPower Electronic ConvertersPower Electronics PackagingPower Measurement And BenchmarkingPower Module PackagingProject Benchmarking
This paper presents the first reported final results of a benchmarking project "StatPEP" which investigated the Status of Power Electronic Packaging used in commercial DC/DC and AC/DC switch mode power supplies. The methodology of the project is first described. Some of the salient results of a comprehensive benchmarking of DC/DC converters (rated power of 100 W) and AC/DC converters (rated power up to 576 W) are presented. Examples for figures-of-merit are presented. The results of the investigation are presented in a generic form, which does not identify individual products. A comparison of the performance of the units shows that the measured power density of the AC/DC units is approximately 10% that of the DC/DC while the thermal density based on footprint is 50%. Also the switching frequency of the AC/DC is 50% that of the DC/DC. Some of the reasons for these differences are discussed.
3
Where are power supplies headed?
R.J. Huljak, V.J. Thottuvelil, A. Marsh et al. · 2002 · 51 citations
D.T. Staffiere, J. Sarjeant · 2002 · 32 citations
Engineering, Computer Engineering, Electrical Engineering +14